I went to work with Naza’s bike last Friday, until way past midnight.
This time I wanted to finish off with the shifters. I tried to cut the cable housing with a normal cable cutter for electrical wiring jobs. It was a futile attempt, and I made a mess out of the cable housing. Uh oh, I really need a bicycle cable cutter, and just in case, a new shifter cable.
I’ve got an idea what to do with the wheelset’s rims. I filed out the valve holes with a set of small files, legacy of my late father-in-law. Thanks Abah.
Bit by bit, the valve holes are filed bigger to accept Schrader valves on my inner tubes. It worked pretty well. Both tires were in place, and wheelsets completed.
Last Saturday, Yad – my office mate, asked me to bring him to a bike shop - window shopping for a new bike. He’s keen on taking up cycling again. As I am babysitting my kids, I brought them along to Auntie’s bike shop in Taman Universiti, Skudai.
Yad brought along another office mate, Isaac, and Dafi.
Next, we went to Md Noor’s mother’s shop in Tampoi. Not much different, really. At least now they know the place.
Yad asked me to take a look on his steel bike. He had that bike since he was in form 4, and never been serviced. That was the first time I’ve seen a Shimano Biopace crankset.
Anyway, the major problem with that bike was the sluggish crankset.
With the bike tool at hand, I started working. Much of it was guesswork, really. Surprisingly, the bike tool is quite complete to do the job. And many were used for the first time, working on Yad’s crankset. I took off the bottom bracket (bb). It appeared that the bearing housings had broken into pieces, and the grease inside the bb had hardened into gunk. The best step forward is to get a new pair of ball bearings with races to replace the old ones. Job done and new knowledge gained.
I’ve got the v-brake bosses from BC on Monday in KL, over teh tarik in front of his office building. He agreed to give me those for free (thanks, bro!) under one condition: repay him by doing deeds to fellow bikers. I gladly told him that they are already paid in full last Saturday.
Yesterday I bought the cable cutter from a hardware shop in Masai. It was gathering dust, and tagged at rm45. The shopkeeper offered at rm40 (which is normal, by the way). Knowing that it hasn’t moved for quite some time, I asked for rm35 - and got it! That very same night, I tried the cutter with the cables. It cuts beautifully, both the cable and the housing.
I worked on the rear brake straight away. Cable cut into lengths, and bosses put into place. V-brakes hung, and cable tightened. The rear wheel is quite bent. It took me some time to adjust the brake pad positions.
Installation of the rear derailleur was quite straightforward, really. I think, that’s the beauty of SRAM’s derailleurs. The front derailleur is actually a Shimano Alivio. That too, was quite easy to install. Anyway, it was really way too late to finish up with the derailleur setting.
But as of last night (technically early morning today), Naza’s bike is complete. Took a spin, and stowed it away nicely beside my T-Bolt.
Went off to sleep (the few hours of it) feeling very happy.
Why Invest in Bitcoin? [2020 Edition]
4 days ago